Step #5

.
Installing the Lenses:
To install the lenses, put in the outside
frame loop first, then slide the wide
portion of the lenses down into the
nosepiece. It should “click” firmly in
place.
.
.
.
.
.
.
.
If the lenses are too loose and do not
“click” firmly in place, bend the outside
frame loop slightly closer to the nosepiece.

Step #6

Adjustments:
Now you have a pair of glasses. A few
simple adjustments and you will have a
nice pair of glasses. It is recommended
that the adjustments always be made in
this order:

Adjustment #1:
Look at the glasses from the front. They
should be straight across the top. Bend
at the nosepiece to straighten.
.
.
.
.
.
.
.
.
.
.
It should now look like this.
.
.
.
.
.
.
.
.
Adjustment #2:
Tighten the loops holding the lenses so
that the lenses have no tilt movement
(front to rear). Place the pliers on the
loops as shown and squeeze the loops
tight against the lenses.
.
.
.
.
.
.
.
.
.
Tighten all 4 loops (2 loops on each lens).
.
.
.
.
.
.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15