Adjustment #6:
Four point check.

With the glasses upside down on a flat
surface, all four points (each corner of
the frame and the earpieces) need to
touch the table at the same time. To
adjust, increase or decrease the distance
between the bottom of the hinge and the
lenses.

Note: This adjustment will affect
adjustment #5, which will in turn affect
adjustment #6, so you will need to go
back and forth between these two
adjustments until you get them to meet
the conditions in both adjustments.
.
Now you have a nice pair of glasses. All
that is needed now is for you to mark
them so that you know what power they
are. The easiest way is to shorten the
tabs you cut off of the lenses and slip
them onto the earpiece (the wide side
of the hole in the tab goes on first). Or
you can use the labels provided in the kit.
.
.
.
.
.
.
.
May God richly bless you as you bless
others with this reading glasses ministry!
.
.
.
.
.
.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15