.
.
.
.
.
.
.
To bend the stop the rest of the way, put
pliers on the end of the wire and on the
outside of the top of the coil and squeeze
tightly. Bend as tight to the coil as
possible. You cannot get it too tight! Do
both earpieces in this way.
.
.
.
.
.
.
.
.
.
.
.
.
.
Check and see if the earpieces open up
equally to about 90 degrees to the frame.
If not, grasp the stop with the tip of the
pliers and bend so that it is contacted
sooner or later as needed.
.
.
.
.

.
.
.
Grasp the stop with the tip of the pliers
and ben so it is contacted earlier or (as
in this example) later.
.
.
.
.
.

.
.
.
.
It should now look like this. Check both
earpieces.
.
.
.
.
.

.
.
.
.
Your frame should now look like this.
.
.
.
.
.
.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15