.
.
With the front of the frame facing
to the right, place the loop you just
bent around the upright metal just
to the left of the wooden block.
.
.
.
.
.

.
.
.
Then bend the wire around the
other upright metal.
.
.
.
.
.
.

.
.
.
Do the same on the other side,
also with the front of the frame to
the right.
.
.
.
.
.

.
.
.
Your finished bends should look
like this.
.
.
.
.
.
.

.
Now we need to bend the frame to
match the curvature of the lenses.
With the front of the frame facing
away from you, grasp the portion
of the frame that will be behind the
top of one of the lenses, and with
your thumbs, bend slightly.
.
.
.

.
.
.
Do the same to both sides.
.
.
.
.
.
.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15